Release 5.5.1¶

Bug Fixes¶

The following issues were fixed.

1. Change Of Value (CoV) subscriptions in BACnet fail if there are too many open subscriptions active at the same time.
2. Wall controller blink function was not working when configured as a one button (toggle) switch.
3. Sensor initialization takes too long to stabilize in a large cluster.
4. Sensor data reports are not available for very long periods of time at startup of the smartdirector in a large cluster.
5. The fixture type programming dialog would present a blank screen with certain 2 and 3 channel fixture type gateways.
6. The control lights override for a location fails if the new light level is set to 0.
7. The new position for location name after repositioning in the floor plan is not saved.
8. The cluster software upgrade would fail on configurations that were originally generated in very early software releases (prior to 4.x).
9. The disconnected fixture count can is higher than actual number in some cases where an empty fixture entity gets added.

Open Issues¶

1. Under commission systems in floorplans section, uploading a new floorplan image to replace an older image may not be seen unless the browser cache is refreshed.
2. The ability to merge multiple clusters into a single cluster is not available in smartmanager.
3. MQTT API for environmental sensor incorrectly publishes data to locations that do not have the sensor, if the sensor was part of the location earlier, but has been moved out.
4. Temperature alarms configured for fixtures in a location are not being activated.